High tensile stainless steel reinforced polyurethane belts with widths of 6 mm, 10 mm and 16 mm, coupled with aluminium alloy machine cut pulleys, provide cost effective motion over extended centres.
Features and options for our timing pulleys
- Zero-backlash pulleys
- 2.5 mm pitch available with bores sizes 3, 4, 6 and 8 mm as standard
- 5 mm pitch available with bores sizes 4, 6 and 8 mm as standard
- Alternative bores available
- 0, 1 or 2 flanges available
- Tapped holes available
- Keyed bores available
Features and options for our timing belts
- Temperature range for the belts: -30ºC to +80ºC
- Maximum allowable peripheral load 2.5mm pitch: 6mm wide belt = 65 N
- Maximum allowable peripheral load 5mm pitch: 10mm wide belt = 330 N, 16 mm wide belt = 570 N
- Maximum peripheral speed: 80 m/s
- Timing belt width tolerance: ±0. 3mm
- Timing belt lengths: 2.5mm pitch from 55mm to 950 mm, 5.0 mm pitch from 100 mm to 1,380 mm
- Number of teeth on timing pulleys: 2.5mm pitch from 12 to 60, 5 mm pitch from 10 to 60
- Anti-static belts available.
To contact Reliance Precision Australia about Timing Belts and Pulleys use Get a quote.
Reach valuable industrial buyers in minutes
Promote key products & content
Drive cost effective & measurable sales